Vantec UGT-ST320R User Guide - Page 13
For Windows® XP/Server 2003
View all Vantec UGT-ST320R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
on-screen instructions to complete the Windows installation. For An Existing Installation 1. Setup the RAID Array prior to driver installation and boot up to Windows. 2. At Found New Hardware Wizard, click Next. 3. Select Search for a suitable driver for my device (recommend) then click Next. 4. Insert the driver CD, check CD-ROM drives, uncheck the other boxes, click Next, then click Next again. 5. Click Finish. For Windows® XP/Server 2003 For New Installation A new installation requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the "UGT-ST320R\XP_2003_Vista_2008 32-bit" folder, found on the driver CD, onto a blank floppy disk then follow the directions below. 1. Setup the RAID Array prior to Windows installation. 2. Follow Microsoft's Windows installation procedure. UGT‐ST320R Page 13