Vantec UGT-ST320R User Guide - Page 7
Manual configuration
View all Vantec UGT-ST320R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. At the next screen select Create RAID Set, then press Enter. 3. Select Striped, then press Enter. 4. Select Auto configuration, then press Enter. 5. When asked Are You Sure (Y/N)?, press Y to accept. 6. Press Ctrl+E to exit the BIOS. 7. When asked Are you sure to exit (Y/N)?, press Y to exit and reboot. 8. Continue with FDISK and FORMAT steps as if you were installing a conventional hard drive. Manual configuration 1. As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS. 2. At the next screen select Create RAID Set, then press Enter. 3. Select Striped, then press Enter. 4. Select Manual configuration then press Enter 5. Select the first drive, press Enter. 6. Select the second drive, press Enter. 7. Select chunk size from 4k, 8k, 16k, 32k, 64k or 128k, then press Enter. UGT‐ST320R Page 7