Vantec UGT-ST320R User Guide - Page 8

RAID 1 Mirror, For New/Blank Hard Drives

Get Vantec UGT-ST320R - SATA 150 PCI Combo Host Card PDF manuals and user guides View all Vantec UGT-ST320R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

8. When asked Are You Sure(Y/N)?, press Y to accept. 9. Press Ctrl+E to exit the BIOS. 10. When asked Are you sure to exit(Y/N)?, press Y to exit and reboot. 11. Continue with FDISK and FORMAT steps as if you were installing a conventional hard drive. RAID 1 (Mirror) For New/Blank Hard Drives 1. As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS. 2. At the next screen select Create RAID Set, then press Enter. 3. At the next screen select Mirrored then press Enter. 4. Select Auto configuration, then press Enter. 5. When asked Are You Sure(Y/N)?, press Y to accept. 6. Press Ctrl+E to exit the BIOS. 7. When asked Are you sure to exit(Y/N)?, press Y to exit and reboot. 8. Continue with FDISK and FORMAT steps as if you were installing a conventional hard drive. UGT‐ST320R Page 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
UGT‐ST320R
Page 8
8.
When asked
Are You Sure(Y/N)?
, press
Y
to accept.
9.
Press
Ctrl+E
to exit the BIOS.
10.
When asked
Are you sure to exit(Y/N)?
, press
Y
to exit and
reboot.
11.
Continue with FDISK and FORMAT steps as if you were
installing a conventional hard drive.
RAID 1 (Mirror)
For New/Blank Hard Drives
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted to enter
the RAID BIOS.
2.
At the next screen select
Create RAID Set
, then press
Enter
.
3.
At the next screen select
Mirrored
then press
Enter
.
4.
Select
Auto configuration
, then press
Enter
.
5.
When asked
Are You Sure(Y/N)?
, press
Y
to accept.
6.
Press
Ctrl+E
to exit the BIOS.
7.
When asked
Are you sure to exit(Y/N)?
, press
Y
to exit and
reboot.
8.
Continue with FDISK and FORMAT steps as if you were
installing a conventional hard drive.