Vantec UGT-ST320R User Guide - Page 14

3. At the Windows Setup screen, press F6 to install the RAID driver. 4. When prompted, press S to specify the location of the driver. 5. Insert the floppy disk, then press Enter. 6. Select Silicon Image SiI 3x12 SATARaid Controller for Windows XP/Server 2003/Vista, then press Enter. 7. Press Enter to finish driver installation, then follow the on-screen instructions to complete the Windows installation. For An Existing Installation 1. Setup the RAID Array prior to driver installation and boot up to Windows. 2. At the Found New Hardware Wizard, select No, not this time, then click Next. 3. Insert the driver CD, select Install the software automatically (Recommended), and click Next. 4. Click Finish 5. Restart Windows to complete the installation. For Windows®XP-x64/Server 2003-x64 For New Installation UGT‐ST320R Page 14