ViewSonic PJ862 User Manual - Page 44
NETWORK Menu
![]() |
View all ViewSonic PJ862 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Multifunctional settings NETWORK Menu With the NETWORK menu, items shown in the table below MENU [RGB] :SELECT can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to PICTURE DHCP TURN OFF IMAGE IP ADDRESS VIDEO Qlty. SUBNET MASK INPUT DEFAULT GATEWAY SETUP INFORMATION SCREEN OPTION NETWORK EASY MENU the following table. Make your Network settings by manual operation as following the dialog box. Item DHCP IP ADDRESS SUBNET MASK DEFAULT GATEWAY INFORMATION Description Using the buttons ▲/▼ turns on/off the DHCP function. TURN ON TURN OFF If your network doesn't support the DHCP function, select the TURN OFF. Enter the IP address of the projector using the buttons. This menu is available only when the item of the DHCP is set to TURN OFF. 192. 168. 1. 24 IP ADDRESS Enter the SUBNET MASK of your NETWORK using the buttons. This menu is available only when the item of the DHCP is set to TURN OFF. 255. 255. 255. 1 SUBNET MASK Enter the DEFAULT GATEWAY. This is the address of the device as gateway to an outer network. This menu is available only when the item of the DHCP is set to TURN OFF. 255. 255. 255. 0 DEFAULT GATEWAY Selecting this item shows the information about the current network setting of the projector. ViewSonic PJ862 40
![](/manual_guide/products/viewsonic-pj862-user-manual-68857d0/44.png)