ViewSonic PJD6683ws PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 58
Language, Projector, Position, Auto Power, Blank Timer, Panel Key, Splash, Screen, Capture, Message
View all ViewSonic PJD6683ws manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4. SYSTEM SETUP: Basic menu Function Language Projector Position Auto Power Off Blank Timer Panel Key Lock Splash Screen Description Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 23 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 12 for details. Allows the projector to turn off automatically if no input signal is detected after a set period of time. See "Setting Auto Power Off" on page 57 for details. Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See "Hiding the image" on page 37 for details. Disables or enables all panel key functions except II POWER on the projector and keys on the remote control. See "Locking control keys" on page 37 for details. Allows you to select which logo screen will be displayed during projector start-up. Screen Capture Captures and stores the projected picture as Screen Capture. See "Creating your own startup screen" on page 38 for details. Message LAN Control Settings Selecting On displays the current information on the screen when the projector is detecting or searching for a signal. See "Controlling the projector through a LAN environment" on page 39 for details. Standby Settings See "Using the projector in standby mode" on page 45 for details. High Altitude A mode for operation in high altitude areas. See "Operating in a Mode high altitude environment" on page 37 for details. DCR Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode between normal and economic modes according to the input image detected. This function is only available when a PC source is in use. After enabling DCR, frequent lamp mode switching may shorten lamp life and noise level will vary during operation. 5. SYSTEM SETUP: Advanced menu 53