ViewSonic Pro7827HD Pro7827HD User Guide English - Page 53
Computer, Enable, Direct Power On, Auto Power Off, Sleep Timer, Power Saving, Disable, Smart Restart
View all ViewSonic Pro7827HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
3. SOURCE menu Function Description Computer Selecting Enable allows the projector to turn on automatically once the VGA signal is fed through the VGA cable. Auto Power On CEC See "Using the CEC function" on page 37 for details. Smart Energy Smart Restart Direct Power On Selecting On allows the projector to turn on automatically once the power is fed through the power cord. Auto Power Off See "Setting Auto Power Off" on page 52 for details. Sleep Timer See "Setting Sleep Timer" on page 52 for details. Power Saving See "Setting Power Saving" on page 52 for details. Selecting Enable enables you to restart the projector immediately within 120 seconds after turning it off. After 120 seconds, if the projector is not turned on again, it will directly enter the standby mode. It takes some time to initiate this function. Make sure the projector has been turned on for more than 4 minutes. If the projector is resumed by using the Smart Restart feature, this function can be executed immediately. Quick Power Off When Enable is selected, the Quick Power Off function will be automatically set to "Enable". Selecting Enable enables the function and the projector will not enter the cooling process after being shut down. Selecting Disable disables the function and the projector will enter normal cooling process after being shut down. If you attempt to restart the projector right after it's been turned off, it may not be turned on successfully and will rerun its cooling procedure. Lamp SPA Mode MHL Settings When Disable is selected, the Smart Restart function will be automatically turned off. Selecting Enable sets the projector's cooling time after being shut down to 180 seconds. If Disable is selected, the cooling procedure will depend on the Smart Restart and Quick Power Off settings. When Enable is selected, the Smart Restart and Quick Power Off functions will be automatically turned off. Power Out Sets the MHL power output port. If the MHL/HDMI input can't be detected. Reset Power Out. MHL Reset Selecting Reset to reapply power after a power outage. 46