ViewSonic Pro7827HD Pro7827HD User Guide English - Page 54
System Setting: Advanced Menu
View all ViewSonic Pro7827HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4. SYSTEM SETTING: BASIC menu Function Language Projector Position Menu Settings Blank Timer Splash Screen Screen Capture My Button Advanced High Altitude Mode DCR Description Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 23 for details. See "Choosing a location" on page 12 for details. Menu Display Time Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in 5-second increments. Menu Position Sets the On-Screen Display (OSD) menu position. See "Hiding the image" on page 36 for details. Allows you to select which logo screen will be displayed during projector start-up. See "Creating your own startup screen" on page 36 for details. Sets a hotkey on remote control. Pattern The projector can display several test patterns. It helps you adjust the image size and focus and check that the projected image is free from distortion. Message Selecting On displays the current information on the screen when the projector is detecting or searching for a signal. Presentation Timer See "Setting the presentation timer" on page 35 for details. A mode for operation in high altitude areas. See "Creating your own startup screen" on page 36 for details. Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode between normal and economic modes according to the input image detected. This function is only available when a PC input signal is selected. After enabling DCR, frequent lamp mode switching may shorten lamp life and noise level will vary during operation. Audio Settings See "Adjusting the sound" on page 38 for details. 5. SYSTEM SETTING: ADVANCED menu 47