ViewSonic Pro8600 PRO8600 User Guide (English) - Page 29

Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Go to the Setting > Presentation Timer menu and press ENTER on the projector or Enter on the remote control to display the Presentation Timer page. 2. Highlight Timer Period and decide the timer period by pressing / . The length of time can be set from 1 to 240 minutes in 1-minute increments. Important • If the timer is already on, the timer will restart whenever the Timer Period is reset. 3. Press to highlight Display Timer and choose if you want the timer to show up on the screen by pressing / . Selection Always 1 Min/2 Min/3 Min Never Description Displays the timer on screen throughout the presentation time. Displays the timer on screen in the last 1/2/3 minute(s). Hides the timer throughout the presentation time. 4. Press to highlight Timer Position and set the timer position by pressing / . Top-Left → Bottom-Left → Top-Right → Bottom-Right 5. Press to highlight Timer Counting Direction and select your desired counting direction by pressing / . Selection Count Up Count Down Description Increases from 0 to the preset time. Decrease from the preset time to 0. 6. To activate the presentation timer, highlight Presentation Timer and press / to select On and press ENTER on the projector or Enter on the remote control. To cancel the timer, perform the following steps: 1. Go to the Setting > Presentation Timer > Presentation Timer menu and highlight Off. 22