ViewSonic Pro9500 PRO9500 User Guide (English) - Page 115

1. Connection to the network 1.2 Installing the "LiveViewer" 1.2.1 Installing the "LiveViewer" The "LiveViewer" software needs to be installed on all the computers to connect to the projector through a network. You need to log in as an administrator user to install the software. 1) Turn on the computer. 2) Shut down all applications. 3) Insert the accompanying CD-ROM into the computer's CD-ROM drive. 4) Click on the [Start] button on the toolbar and select the "Run". 5) Enter E:\Application\LiveViewer\LiveViewer_Setup.exe and then press the [OK]. If your CD-ROM drive is not drive E on your computer, you will need to replace E with the correct drive letter assigned to your CD-ROM drive. 6) After a moment, the Choose Setup Language dialog will appear as shown on the right. Select what you like to use in the list, and click the [OK]. If the software has been already installed, Uninstallation will be done. Click the [Cancel] button, then uninstallation will be canceled. If you uninstalled the software by miss-operation, please re-install the software from first procedure. 7) After a moment, the Welcome dialog will appear as shown on the right. Press the [Next]. ViewSonic 110 Pro9500