ViewSonic Pro9500 PRO9500 User Guide (English) - Page 189

7. Other Functions 7.2 Projector Management using SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function. NOTE • It is recommended that SNMP functions be carried out by a network administrator. • SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP Settings Configure the following items via a web browser to use SNMP. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter your user name and password, and then click the [OK]. 3) Click the [Port Settings] on the main menu. 4) Click the [Download MIB file] to download a MIB file. NOTE • To use the downloaded MIB file, specify the file by your SNMP manager. 5) Click the [Enable] check box to open the SNMP Port. Set the IP address to send the SNMP trap to when a Failure/Warning occurs. NOTE • A Network Restart is required after the SNMP Port configuration settings have been changed. Click the [Network Restart] and configure the following items. 6) Click the [Security Settings] on the main menu. 7) Click the [SNMP] and set the community name on the screen that is displayed. NOTE • A Network Restart is required after the Community name has been changed. Click the [Network Restart] and configure the following items. 8) Configure the settings for Trap transmission of Failures/Warnings. Click the [Alert Settings] on the main menu and select the Failure/Warning item to be configured. 9) Click the [Enable] check box to send out the SNMP trap for Failures/Warnings. Clear the [Enable] check box when SNMP trap transmission is not required. 10) Click the [Apply] button to save the settings. ViewSonic 184 Pro9500