ViewSonic Pro9500 PRO9500 User Guide (English) - Page 155
Logon
UPC - 766907522518
View all ViewSonic Pro9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
3. Web Control 3.1 Logon To use the Web Control function, you need to logon with your user name and password. Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) D isplay the logon window as shown on the right. There are two options to display this window. Using the "LiveViewer" Connect your computer and the projector via Network using the "LiveViewer". Then click the Web Control button on the "LiveViewer" main menu to start the Web browser software. Using Web browser software Make sure that your computer and the projector is connected via network, and then start Web browser. Enter the projector's IP address into URL input box of the Web browser as the example below, and then press the Enter key or button. Example: If the IP address of the projector is set to 192.168.1.10: Enter "http://192.168.1.10/" into the address bar of the web browser and press the Enter key or click button. 2) Enter your user name and password, and then click the [OK]. NOTE • The language used on the Web Control screen is the same as that of the OSD on the projector. If you want to change it, you need to change the OSD language on the projector. (SCREEN menu in the Operating Guide) ViewSonic 150 Pro9500