ViewSonic Pro9500 PRO9500 User Guide (English) - Page 16

Setting up Arrangement (continued) WARNING ►Install the projector where you can access the power outlet easily. If an abnormality should occur, unplug the projector urgently. Otherwise it could cause a fire or electric shock. ►Do not subject the projector to unstable conditions. If the projector falls or topples over, it could result in injury or damage to the projector and the surrounding things. Using a damaged projector could result in a fire and an electric shock. • Do not place the projector in unstable places, such as an inclined surface, places subject to vibration, on top of a wobbly table or cart, or a surface that is smaller than the projector. • Do not put the projector on its side, front or rear position. • Do not attach nor place anything on the projector unless otherwise specified in the manual. • Do not use any mounting accessories except the accessories specified by the manufacturer. Read and keep the manuals of the accessories used. • For special installation such as ceiling mounting, be sure to consult your dealer beforehand. ►Do not install the projector near thermally conductive or flammable things. Such things when heated by the projector could result in a fire and burns. • Do not place the projector on a metal stand. ►Do not place the projector where any oils, such as cooking or machine oil, are used. Oil may harm the product, resulting in malfunction, or falling from the mounted position. ►Do not place the projector in a place where it may get wet. Getting the projector wet or inserting liquid into the projector could cause a fire and an electric shock, and damage the projector. • Do not place the projector near water, such as in a bathroom, kitchen, or poolside. • Do not place the projector outdoors or by the window. • Do not place anything containing liquid near the projector. (continued on next page) ViewSonic 11 Pro9500