ViewSonic VT2755LED User Manual - Page 19

Getting Started Personal Computer Use the LCD TV as the monitor of your computer. The picture below shows the connection for PC. The LCD TV can also be connected to PC with DVI or VGA output. DVI cable Rear of TV ENGLISH Audio cable (stereo mini plugs) VGA 15 Pin cable ☼ • Connect the PC IN jack to the PC using a 15-pin cable and audio cable. • If the PC is connected to TV and no signal has been input from PC for more than 5 seconds, the TV will enter standby mode automatically. PC Timing Reference Chart Mode Aspect Ratio Handling Compatible Input Standard Resolution FS*Full-Screen RGB 720 x 400 @ 70Hz 1920x1080 Yes VESA 640 x 480 @ 60Hz 1920x1080 Yes VESA 640 x 480 @ 75Hz 1920x1080 Yes VESA 800 x 600 @ 60Hz 1920x1080 Yes VESA 800 x 600 @ 75Hz 1920x1080 Yes MAC 832 x 624 @ 75Hz 1920x1080 Yes VESA 1024 x 768 @ 60Hz 1920x1080 Yes VESA 1024 x 768 @ 75Hz 1920x1080 Yes VESA 1280 x 1024 @ 75Hz 1920x1080 Yes VESA 1360 x 768 @ 60Hz 1920x1080 Yes VESA 1440 x 900 @ 60Hz 1920x1080 Yes VESA 1680 x 1050 @ 60Hz 1920x1080 Yes VESA 1920 x 1080 @ 60Hz 1920x1080 Yes ☼ • This TV's PC VGA input does not support interlaced signals. • For the best picture quality, we recommend that you use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency from a personal computer. • Preset Timing Mode (Pre-adjusted to GTF® 1920 x 1080 @ 60 Hz) Note: Simultaneously press "MENU" and "CH▼" keys on TV panel to switch between similar PC timings. Similar PC Timing on list below: • 640 x 400 @ 70Hz / 720 x 400 @ 70Hz • 1280 x 768 @ 60Hz / 1360 x 768 @ 60Hz • 1680 x 1050 @ 60Hz / 1400 x 1050 @ 60Hz • 1600 x 900 @ 60Hz / 1440 x 900 @ 60Hz ViewSonic 10 VT2755LED