Viking VGSO100SS Installation Instructions - Page 2

Table of Contents Warnings & Important Safety Information 3 Dimensions (30"W 6 Specifications (30"W 7 Dimensions (36"W 8 Specifications (36"W 9 Cutout Dimensions (30"W 10 Cutout Dimensions (36"W 11 Clearance Dimensions 12 Electrical & Gas Requirements 12 General Information 14 Installation (30"W 15 Door Removal (30"W 16 Connecting Gas & Electrical (30"W 17 Final Installation (30"W 18 Door Replacement & Adjustment (30"W 19 Installation (36"W 20 Door Removal (36"W 20 Connecting Gas & Electrical (36"W 21 Final Installation (36"W. Single 22 Final Installation (36"W. Double 23 Optional Center Trim Installation (36"W. Double 25 Door Replacement & Adjustment (36"W 25 Final Preparation 26 Performance Checklist 27 Service & Registration 28 IMPORTANT-Please Read and Follow • Before beginning, please read these instructions completely and carefully. • DO NOT remove permanently affixed labels, warnings, or plates from product. This may void the warranty. • All local and national codes and ordinances must be observed. Installation must conform with local codes or in the absence of codes, the National Fuel Gas Code ANSI Z223.1 NFPA54-latest edition. • The installer must leave these instructions with the consumer who should retain for local inspector's use and for future reference. In Canada: Installation must be in accordance with the current CAN/CGA B149.1 & 2 Gas Installation codes and/or local codes. Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes. In Massachusetts: All gas products must be installed by a "Massachusetts" licensed plumber or gasfitter. A "T" type handle manual valve must be installed in the gas supply line to the appliance. Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word "DANGER," "WARNING" or "CAUTION." These words mean: DANGER Hazards or unsafe practices which WILL result in severe personal injury or death WARNING Hazards or unsafe practices which COULD result in severe personal injury or death CAUTION Hazards or unsafe practices which COULD result in minor personal injury or property damage All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. 3