Viking VMOH330 Installation Instructions - Page 6
C. Vertical Ventilation System
View all Viking VMOH330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
• Use side cutters or tin snips to cut and remove parts B from back plate. Be careful not to distort the plate. See Figure 10. Parts B Figure 10 STEP 4 • Place the blower unit into the opening and secure it to the oven with the screws (3) from step 2. See Figure 11. Figure 13 Be sure that the damper hinge is on the top and the damper swings free into the wall outlet. C. VERTICAL VENTILATION SYSTEM The unit is shipped assembled for recirculating. STEPS 1 & 2 • A-1 Ventilation motor. See Figure 8. STEP 3 • Turn the blower unit so that the fan blade openings are facing upward. See Figure 14. Fan Blade Openings Facing Up After Turning Figure 11 • Carefully match the exhaust opening location of the microwave and attach the damper to the rear plate by sliding it into the guides at the rear plate. See Figures 12,13. Damper Back of Oven Figure 14 Figure 12 1.TINSKB278MRR0_Viking_VMOH330SS_OTR_Install_E,S,F.indd 6 E 6 1/31/19 11:07 AM