Viking VMOH330 Installation Instructions - Page 9
Connecting Ductwork, How To Replace The Charcoal Filter
View all Viking VMOH330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
STEP 4 • Insert a bolt down through each hole in the upper cabinet bottom. • Tighten the bolts until the gap between the upper cabinet and microwave oven is closed. See Figure 24. HOW TO REPLACE THE CHARCOAL FILTER 1. Unplug the oven or turn off the power at the main power supply. 2. Remove the grille air mounting 3 screws and open the door. See Figure 26. Figure 26 Figure 24 CONNECTING DUCTWORK Extend the house duct down to connect to the exhaust adapter. Seal exhaust duct joints using duct tape. See Figure 25. House Duct 3. Slide the grille air to the left, then pull it straight out. 4. Push the charcoal filter backward and remove it. 5. Slide a new charcoal filter into place. The filter should rest at the angle. See Figure 27. Charcoal Filter Grille Air Figure 25 Figure 27 6. Replace the grille air and 3 screws and close the door. 7. Plug the oven in or turn on the power at the main power supply. 1.TINSKB278MRR0_Viking_VMOH330SS_OTR_Install_E,S,F.indd 9 E 9 1/31/19 11:07 AM