Vizio VHT210 VHT210 User Manual - Page 10

VIZIO VHT210 User Manual Wired Connection to an iPod Dock (not supplied by VIZIO) 1. Turn off power to the Sound Bar and the MP3 Player. 2. Connect one end of the audio cable to the analog audio output on the MP3 player docking unit. 3. Connect the other end of the audio cable (white and red connectors) to the IN jacks on the Sound Bar. 4. Turn on the power to the Sound Bar and MP3 Player. 5. Select the associated input by pressing IN on the top of the Sound Bar. Notes:  The iPod and Play/Pause/Previous/Next buttons on the remote control only control a VIZIO-branded iPod dock and will not control a 3rd party iPod dock or MP3 player.  Most MP3 players commonly use a 1/8" Stereo Mini-Jack. In this case, use a 1/8" stereo mini-jack-toRCA (AV) cable (sold separately).  If wall mounting of the Sound Bar System is planned, purchase a right-angle RCA cable to avoid mounting interference.  Refer to your MP3 Player user manual for more information about the audio output settings and connections of the product. CAUTION: Do not connect the MP3 Player headphone output directly to the Sound Bar. This can result in damage to the devices. A docking unit or equivalent conversion unit is required to adapt line level audio to the Sound Bar. Sub-Woofer Placement With wireless connectivity of up to 60 feet, the wireless subwoofer can be placed anywhere in your home theater room. For best sound performance from the subwoofer, place it directly on the floor, and if possible, in a corner of your home theater room. 10 www.VIZIO.com