Vizio VHT210 VHT210 User Manual - Page 6

VIZIO VHT210 User Manual Wall Mounting the Sound Bar The Sound Bar can either be kept on the stand or mounted on the wall. If you choose to mount the Sound Bar on the wall, follow the instructions below for removing the stand. 1. Remove the stands from their original configuration as shown in Figure 1. 2. Flip the stand over and re-attach to the Sound Bar as shown in Figure 2. 3. Connect Audio and Video Cables to the Sound Bar (see Connecting Equipment on page 13 for detailed steps). 4. Connect the power cord to the power cord connector on the back of the Sound Bar. 5. Mark and drill holes in the desired location. Use anchors (not included) if you are not drilling into studs. 6. Insert screws (not included), leaving room for the Sound Bar stands. 7. Hang your Sound Bar on the screws. Caution:  Make sure that there are no electrical cables hidden behind walls before you begin to drilling.  If wall mounting of the Sound Bar is planned, purchase a right-angle RCA cable to avoid mounting interference. Figure 1 Figure 2 6 www.VIZIO.com