Vizio VHT210 VHT210 User Manual - Page 16

VIZIO VHT210 User Manual Sound Bar Error Codes If an unsupported rate or sample depth is detected via the Optical Input, or an overcurrent or thermal shutdown occurs, the LEDs flash error codes. One example is when AC3 (not PCM) from a DVD player is sent to the optical input. The Sound Bar will mute the audio output and the LEDs will flash an error pattern. A B C D LED A B C D Problem Optical compressed format detected Optical rate unsupported Overcurrent error Thermal shutdown Resolution Configure the DVD player (or audio source device) audio output format to PCM or PCM stream. Or, use the Analog RCA inputs from the audio source to the Sound Bar. Configure the audio sample rate of the audio source device either 48KHz or 44.1 KHz. Reduce the volume setting of the Sound Bar and Subwoofer temporarily, and turn the unit off for a short period to reset the circuitry. If this continues to occur, then reduce the volume level for the content being played. Turn off the Sound Bar and verify the ventilation slots in the bar are clear, the bar has proper ventilation, and is not being operated in an environment that is too hot. Subwoofer Error Codes Subwoofer LED Problem Short On, Long Off No wireless network link Long on, Short off Network available but no audio link to the Sound Bar Resolution Any button press clears the error condition and returns the subwoofer to its normal state. Two short blinks Subwoofer is too hot or overpowered 16 www.VIZIO.com