Vonage VWRVD User Manual - Page 18

Chapter 3 - Configuration Wireless Enable AP - Check this box to enable the wireless function. SSID - Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is DLinkVWR. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. Disable SSID Broadcast - Uncheck the box to broadcast the SSID across the network. All devices on a network must share the same SSID (Service Set Identifier) to establish communication. Check the box if you do not wish to broadcast the SSID over the network. Channel - All devices on the network must share the same channel. (Note: The wireless adapters will automatically scan and match the wireless setting.) For best results, use channels 1, 6, or 11. 802.11 Mode - Select the mode from the drop-down menu. Mixed - Select if using both 802.11b and 802.11g wireless devices. B Only - Select if using all 802.11b wireless devices. B+ - Select if using both 802.11b and b+ wireless devices. G Only - Select if using all 802.11g wireless devices. D-Link VWR User Manual 14