Vonage VWRVD User Manual - Page 7

Chapter 1 - Product Overview Front Panel Power When the power light stops blinking and is a solid green, this indicates that your adapter has started up properly. Note that both the power light and the phone light must be solid in order to make a phone call. Internet Wireless A solid light indicates A solid light indicates connection on the that the wireless Internet port. This segment is ready. light blinks during This light blinks data transmission. during wireless data transmission. Ethernet (1-4) Phone (1-2) A solid light indicates Solid light indicates a connection to an that the phone Ethernet-enabled line is ready for computer on ports Vonage Internet 1-4. This light telephone or FAX blinks during data calls. A slow blinking transmission. light indicates that voicemail is present. When the line is in use or ringing, the light will blink rapidly. Note: When the Vonage Device is downloading/upgrading firmware from Vonage,the lights will blink rapidly in unison. Rear Panel Phone (1 & 2) Plug your phone into port #1 and if you've signed up for a second Vonage phone line, an optional phone or FAX machine into phone port #2. Ethernet (1-4) Connect to other Ethernet devices such as computers using standard Ethernet cables. Internet This port is the connection for the Ethernet cable to the Cable or DSL modem. Reset Press the reset button for at least 10 seconds to reset the Vonage VWR Device back to the default settings. Power Plug in the supplied power adapter. D-Link VWR User Manual 3