Vtech DS6321-3 User Manual (DS6321-3 User Manual) - Page 52

Telephone operation Intercom Use the intercom feature for conversations between two system handsets. You can buy additional expansion handsets (DS6301) for this telephone system. You can register up to 12 handsets to the telephone base. To initiate an intercom call: 1. Press MENU/SELECT on the handset when it is not in use. 2. Press or to highlight Intercom, then press MENU/SELECT. • If you have a two-handset system, your handset displays Calling other handset. The destination handset rings and displays Handset X is calling. Ans. system Directory Call log Intercom Bluetooth INTERCOM TO: • If you have more than two handsets, your handset Handset 2 displays INTERCOM TO: and a list of registered Handset 3 handsets. Press or to select a destination Handset 4 handset and then press MENU/SELECT. Your Handset 5 handset displays Calling Handset X. The destination rings and displays Handset X is calling. To answer an intercom at the destination handset: • Press /HOME/FLASH or . Both screens show Intercom. To silence an intercom call: • Press OFF/CLEAR or MUTE/REMOVE on the destination handset. Its screen displays Ringer mute for a few seconds. To end an intercom call: • Press OFF/CLEAR or place either handset back in the telephone base or charger. Both handsets display Intercom ended. • You can cancel the intercom call before it is answered by pressing OFF/CLEAR on your originating handset. • If the destination handset does not answer the intercom call within 100 seconds, is in the directory or call log, or is out of range, the originating handset displays Unable to call try again and returns to idle mode. • You can use a maximum of five handsets at a time. For example, when four handsets are used on intercom calls, use another handset for an outside call. When two handsets are used on an intercom call, you can use three other handsets for an outside call. 48