Vtech DS6511-4A User Manual - Page 73
California Energy Commission battery charging testing instructions
View all Vtech DS6511-4A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Appendix California Energy Commission battery charging testing instructions This telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are intended for California Energy Commission (CEC) compliance testing only. When the CEC battery charging testing mode is activated, all telephone functions, except battery charging, will be disabled. To activate the CEC battery charging testing mode: 1. Unplug the telephone base power adapter from the power outlet. Make sure all handsets are plugged with charged batteries before proceeding. 2. While you press and hold /FIND HANDSET, plug the telephone base power adapter back to the power outlet. 3. After about 10 seconds, when the IN USE light starts flashing, immediately press /FIND HANDSET again. You must press /FIND HANDSET while the IN USE light is still flashing. The IN USE light flashes for about five seconds. • When the phone successfully enters the CEC battery charging testing mode, all handsets alternately show To register HS... and ...see manual. • When the phone fails to enter this mode, repeat Step 1 through Step 3 above. To deactivate the CEC battery charging testing mode: 1. Unplug the telephone base power adapter from the power outlet, then plug it back in. Then, the telephone base is powered up as normal. 2. Place the handset in the telephone base to register it back. The handset shows Registering... then Registered and you hear a beep when the registration process completes. This process takes about 90 seconds to complete. If registration fails, the handset displays Failed. Repeat Step1 to 2 again. 69