Weber Genesis Jr LP Owner Manual - Page 11

Assemble, wheels, frame

Get Weber Genesis Jr LP PDF manuals and user guides View all Weber Genesis Jr LP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Step 2 Assemble wheels You will need: axle, two wheel hubcaps, two wheels, wheel frame, hammer and block of wood. Place one end of the axle on the block of wood (or other protected surface). Tap on one hubcap. Put one wheel on the axle, WEBER side toward the hubcap. Slide the axle through the frame. Add the other wheel, Weber side out. Tap on the hubcap. Figure 1. "iirinaw Step 3 Assemble the frame You will need: left frame, right frame, two nylon washers, two 1/4-20 x 1/2 inch bolts, and a 7/16 inch open-end or an adjustable wrench. Note - Work on carpeted area (on grass, or on one of the boxes) to protect the finish during frame assembly. Put the frame pieces so the leg tabs are up. Put the right frame to your right and left frame to your left. Figure 2. Slip the two frame halves together with the tabs inside, until the tabs of the right frame are inside the left frame and the holes align. Figure 2 (a). Slip washers over bolts; insert and tighten bolts. (If you try to insert a bolt and there are no holes, you have the left frame turned the wrong way. Turn the left frame around.) Figure 2 (b). • Figure 1 0 Leg tabs Left frame (a) Frame tabs Right frame (b) 0 Figure 2 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Step
2
Assemble
wheels
You
will
need:
axle,
two
wheel
hubcaps,
two
wheels,
wheel
frame,
hammer
and
block
of
wood.
Place
one
end
of
the
axle
on
the
block
of
wood
(or
other
protected
surface).
Tap
on
one
hubcap.
Put
one
wheel
on
the
axle,
WEBER
side
toward
the
hubcap.
Slide
the
axle
through
the
frame.
Add
the
other
wheel,
Weber
side
out.
Tap
on
the
hubcap.
Figure
1.
"iirinaw
•
Figure
1
Step
3
Assemble
the
frame
You
will
need:
left
frame,
right
frame,
two
nylon
washers,
two
1/4-20
x
1/2
inch
bolts,
and
a
7/16
inch
open-end
or
an
adjustable
wrench.
Note
-
Work
on
carpeted
area
(on
grass,
or
on
one
of
the
boxes)
to
protect
the
finish
during
frame
assembly.
Put
the
frame
pieces
so
the
leg
tabs
are
up.
Put
the
right
frame
to
your
right
and
left
frame
to
your
left.
Figure
2.
Slip
the
two
frame
halves
together
with
the
tabs
inside,
until
the
tabs
of
the
right
frame
are
inside
the
left
frame
and
the
holes
align.
Figure
2
(a).
Slip
washers
over
bolts;
insert
and
tighten
bolts.
(If
you
try
to
insert
a
bolt
and
there
are
no
holes,
you
have
the
left
frame
turned
the
wrong
way.
Turn
the
left
frame
around.)
Figure
2
(b).
Leg
tabs
Left
frame
0
0
(a)
(b)
Figure
2
Frame
tabs
Right
frame
11