Weider 2980 X Canadian English Manual - Page 13
Attach the Pulley and two Half Guards 43
View all Weider 2980 X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
18. Route the Low Cable (53) under a 90mm Pulley (48) and through the Upright (3). Attach the 18 Pulley inside the Upright with an M10 x 67mm Bolt (71), two M10 Washers (57), two 12mm Spacers (52), and an M10 Nylon Locknut (56). 56 52 57 48 53 3 52 71 57 19. Route the Low Cable (53) over a 90mm Pulley (48). Attach the Pulley and two Half Guards (43) 19 to the Double U-bracket (63) with an M10 x 46mm Bolt (81) and an M10 Nylon Locknut (56). Make sure that the Half Guards are on the outside of the U-bracket as shown. 56 43 48 63 43 53 81 20. Route the Low Cable (53) under a 90mm Pulley 20 (48). Attach the Pulley and two Half Guards (43) to the Base (1) with an M10 x 46mm Bolt (81) and an M10 Nylon Locknut (56). Make sure that the Half Guards are on the outside of the bracket as shown. 56 43 53 48 81 1 43 13