Weider 2980 X Canadian English Manual - Page 6

ASSEMBLY To make assembly easier, carefully read the following information and instructions: • Assembly requires two persons. • Because of its weight and size, the weight system should be assembled in the location where it will be used. Make sure that there is enough clearance to walk around the weight system as you assemble it. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • For help identifying small parts, use the PART IDENTIFICATION CHART on page 5. • The following tools (not included) may be required for assembly: two adjustable wrenches one rubber mallet one standard screwdriver one Phillips screwdriver Assembly may be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. The Four Stages of the Assembly Process Frame Assembly-You will begin by assembling the base and the uprights that form the skeleton of the weight system. Arm Assembly-During this stage you will assemble the arms and the leg lever. Cable Assembly-During this stage you will attach the cables and pulleys that connect the arms to the weights. Seat Assembly-During the final stage you will assemble the seat and the backrest. 6