Weider 2980 X Canadian English Manual - Page 17

31. Insert the Pad Tube (29) into the Front Leg (7). Slide two Small Foam Pads (28) onto the ends of the Pad Tube. Slide two Small Foam Pads (28) onto the Leg Lever (8). 31 28 29 7 28 28 8 28 32. Attach the Curl Pad (14) to the Curl Post (13) with two M6 x 16mm Screws (62). 32 14 13 62 33. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENT, beginning on page 18. Before using the weight system, pull each cable a few times to make sure that the cables move smoothly around the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAM on page 21 for proper cable routing. If there is any slack in the cables, you will need to remove the slack by tightening the cables. See MAINTENANCE on page 22. 17