Weider 8507 Training User Manual - Page 10
Attach the Pulley and a Large Cable Trap 82
View all Weider 8507 Training manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
16. Remove the 3/8" x 1 3/4" Bolt (48), 3/8" Nylon Jam Nut (5), and 3 1/2" Pulley (15) from the indicated bracket on the Top Frame (67). Insert the end of the Long Cable (66) through the bracket and down through the indicated hole. Re-attach the 3 1/2" Pulley (15) to the bracket on the Top Frame (67) with the 3/8" x 1 3/4" Bolt (48) and 3/8" Nylon Jam Nut (5). Be sure that the Long Cable is between the Pulley and the top of the bracket. 16 5 67 Hole 48 15 66 17. Wrap the Long Cable (66) around the "V" Pulley (76). Attach the Pulley and a Large Cable Trap (82) 17 to the welded bracket on the Top Frame (67) with a 3/8" x 2 1/4" Bolt (50) and 3/8" Nylon Jam Nut (5). Be sure that the Large Cable Trap is turned to the indicated position. 5 67 76 82 50 66 18. Note: The 3 1/2" Pulley (15) used in this step is pre-assembled. It is shown removed for easier 18 part identification. Remove the 3/8" x 1 3/4" Bolt (48), the 3/8" Nylon Jam Nut (5), Cable Trap (59), and the 3.1/2" Pulley (15) from the Swivel Bracket (58) on the left Arm (46). Wrap the Long Cable (66) around the 3 1/2" Pulley (15). Re-attach the Pulley to the Swivel Bracket (58) with the 3/8" Nylon Jam Nut (5) and 3/8" x 1 3/4" Bolt (48). Be sure that the Cable Trap (59) is oriented as shown. 48 66 15 58 5 59 46 10