Weider 8507 Training User Manual - Page 13

23. Attach the 5/16" x 3 1/2" Bolt (87), two 5/16" 23 Washers (8), the 1" Metal Spacer (22), and a 5/16" Nylon Locknut (3) to the Front Upright as shown. Wrap the Short Cable (23) around a 3 1/2" Pulley (15). Attach the Pulley to the Front Upright (42) with a 3/8" x 3 1/2" Bolt (16), a 3/8" Washer (9), and a 3/8" Nylon Jam Nut (5). Be sure that the Short Cable is between the Pulley and the Metal Spacer. 24. Attach the Backrest (41) to the Front Upright (42) with two 1/4" x 2 1/2" Screws (43) and 1/4" 24 Washers (10). 16 15 87 42 9 5 8 3 8 22 23 43 10 41 42 25. Press a 1 1/2" Square Inner Cap (32) into the Seat Frame (36). 25 Insert a 1/4" x 2" Carriage Bolt (38) into the centre hole in the Seat Plate (37). Attach the Seat Plate to the narrow end of the Seat (13) with two 1/4" x 3/4" Screws (18). Insert the 1/4" x 2" Carriage Bolt (38) into the indicated hole in the Seat Frame (36). Tighten a 1/4" Nylon Locknut (7) with a 1/4" Washer (10) onto the Carriage Bolt. Attach the other end of the Seat (13) to the Seat Frame (36) with a 1/4" Washer (10) and the 1/4" x 2" Screw (20). 13 13 37 10 20 7 38 32 18 36