Weider 8507 Training User Manual - Page 8

11. Press a 1 3/4" Square Inner Cap (44) into each end 11 of an Arm (46). Apply lubricant to the lower axles on the Arm Frame (52). Slide an Arm (46) onto one of the axles. Hold two 1" Retainers (54) and a 1" Round Cover Cap (55) against the lower end of the axle. The teeth on the Retainers must bend toward the Round Cover Cap (see the inset drawing). Tap the Retainers and Round Cover Cap onto the axle. Assemble the other Arm (46) to the Arm Frame (52) in the same manner. 12. Insert the two 4 1/2" "L" Pins (60) down through the indicated holes in the Arm Frame (52) and the Arms 12 (46). 52 Lubricate Axle Bracket 44 54 55 44 46 Axle 54 55 60 52 13. Wet both Arms (46) with soapy water. Slide a 7 3/4" Pad (45) onto each Arm. 13 Slide a Handgrip (12) into the indicated end of a 7" Handle (47). Insert the Handle into one of the Arms (46). Attach the Handle with a 5/16" x 2.1/4" Bolt (33), two 5/16" Washers (8), a 1/2" x 3/8" Spacer (51), and a 5/16" Nylon Locknut (3). Attach a 7" Handle (47) to the other Arm (46) in the same manner. 8 46 46 47 12 3 46 8 49 45 45 8 51 33 47