Weider 8507 Training User Manual - Page 9

14. Attach a Large "U" Bracket (56) to one of the Arms 14 (46) with a 3/8" x 2 3/4" Bolt (70), 3/8" Washer (9), and 3/8" Nylon Locknut (21). Be sure that the Swivel Bracket (58) is on the inside as shown. Do not overtighten the 3/8" Nylon Locknut. Attach a Large "U" Bracket (56) to the other Arm 21 (46) in the same manner. 56 9 70 46 58 21 56 46 9 70 15. IMPORTANT: As you assemble the Long Cable (66) and the Short Cable (23), refer to the CABLE 15 DIAGRAMS on page 20 of this manual to make sure that the Cables are properly routed. Find the end of the Long Cable (66) that does not have a rubber ball. Insert that end of the Long Cable up through the indicated opening in the Top Frame (67). Lay the Long Cable (66) over a 4 1/2" Pulley (81). Attach the Pulley inside the Top Frame (67) with a 3/8" x 2 3/4" Bolt (70), two 3/8" Washers (9), the two 1/2" x 1/2" Spacers (65), and a 3/8" Nylon Locknut (21). 81 65 21 9 70 67 9 66 23 9