Weider 8507 Training User Manual - Page 11

19. Note: The 4 1/2" Pulley (81) shown in this step is pre-attached to the Adjustment "U" Bracket (75). Remove the 3/8" x 1 3/4" Bolt (48), 3/8" Nylon Lock Nut (21), and the 4 1/2" Pulley (81) from the Adjustment "U" Bracket (75). Attach the Adjustment "U" Bracket (75) to the Front Upright (42) with the 5/16" x 3 1/4" Bolt (35), a 5/16" Washer (8), and a 5/16" Nylon Locknut (3). Thread the Nylon Locknut onto the Bolt until the first two threads of the Bolt are through the Nylon Locknut. Wrap the Long Cable (66) around the 4 1/2" Pulley (81) as shown. Re-attach the Pulley to the Adjustment "U" Bracket (75) with the 3/8" x 1 3/4" Bolt (48) and 3/8" Nylon Locknut (21). 19 48 38 75 35 81 21 66 42 20. Note: The 3 1/2" Pulley (15) used in this step is pre-assembled. It is shown removed for easier 20 part identification. Wrap the Long Cable (66) around the 3.1/2" Pulley (15) on the right Arm (46). Tighten the 3/8" Nylon Jam Nut (5) and 3/8" x 1 3/4" Bolt (48). Be sure that the Cable Trap (59) is oriented as shown. 66 58 15 5 59 48 46 11