Weider 8530 User Manual - Page 15

28. Press a 1 1/2" Inner Cap (32) into the Leg Lever (29). Lubricate the 5/16" x 2 1/4" Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the 5/16" x 2 1/4" Bolt and a 5/16" Nylon Locknut (3). Insert the 3/8" x 2" Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 3/8" Nylon Locknut (21) with a 3/8" Flat Washer (9) onto the Eyebolt. 29. Rest the Seat Frame (36) on the indicated pin in the Front Upright (42). Attach the Seat Frame to the Front Upright with a 5/16" x 2 3/4" Carriage Bolt (14) and the Seat Knob (40). 28 33-Lubricate 36 3 29 35 32 9 21 29 42 40 36 SEAT ASSEMBLY 14 Pin 30. Press two 3/4" Round Inner Caps (34) into 30 each 13 1/2" Pad Tube (28). Insert one 13 1/2" Pad Tube (28) into the Seat Frame (36). Slide a 6" Pad (30) onto each end of the Pad Tube. Insert the other 13 1/2" Pad Tube (28) into the Leg Lever (29). Slide a 6" Foam Pad (30) onto each end of the Pad Tube. 34 36 30 28 30 34 29 31. Press 1 1/2" Inner Caps (32) into the ends of 31 the Left VKR Arm (79) and the Right VKR 74 Arm (80). Attach the Left VKR Arm (79) and the Right 75 VKR Arm (80) to the VKR Upright (74) with two 5/16" x 3" Bolts (75) and two 5/16" Nylon Locknuts (3). 79 80 3 32 32 15 VKR ASSEMBLY