Weider 9150 Uk Manual - Page 13
Seat Assembly
View all Weider 9150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
24. Wrap the Low Cable (69) around a 90mm Pulley (15). Attach the Pulley and a pair of Pulley 24 Covers (40) to the Press Frame (17) with the M10 x 135mm Bolt (75) used in step 22, and an M10 Nylon Locknut (21). Be sure the large tabs on the Pulley Covers are on the side shown. 40 21 69 40 15 Large 75 Tab 17 25. Wrap the Low Cable (69) around a 90mm Pulley 25 (15). Attach the Pulley, a pair of Pulley Covers (40), and the Large Spacer (79) to the centre hole in the Front Upright (42) with an M10 x 120mm Bolt (85), an M10 Washer (9), and an M10 Nylon Locknut (21). Be sure the large tabs on the Pulley Covers are on the side shown. 42 Large Tab 40 79 40 85 15 69 9 21 Seat Assembly 26 26. Attach the Shroud (59) to the bracket on the Top Frame (55) with two M6 Washers (78) and two M6 x 16mm Screws (18). Attach the Shroud to the bracket on the Base (4) with two additional M6 Washers and two M6 x 16mm Screws. 55 78 18 18 78 59 78 18 4 18 78 13