Weider 9150 Uk Manual - Page 7

3. Insert the two Weight Guides (62) into the indicat- 3 ed holes in the Base (4) and the Stabiliser (5). Be sure that the Weight Guides are oriented with the holes in the positions shown. Attach the Weight Guides to the Base and the Stabiliser with two M10 x 78mm Bolts (14), two 17.5mm Spacers (77), two M10 Washers (9), and two M10 Nylon Locknuts (21). Slide two Weight Bumpers (19) onto the Weight Guides (62). Hole 62 Hole 4. Slide the nine Weights (25) onto the Weight Guides (62). Be sure the pin grooves are on the side shown. Press the Weight Tube Bumper (72) into the bottom of the Weight Tube (63). Insert the Weight Tube into the centre hole in the Weights (25). Be sure the pin on the Weight Tube rests in the indicated pin groove. Lubricate the indicated holes in the Top Weight (56). Slide the Top Weight onto the Weight Guides (62), with the pin groove on the side shown. 21 9 19 Hole 19 9 77 14 5 14 4 4 56 Lubricate 62 Pin Groove 63 Pin 72 25 Pin Groove 7