Weider 9150 Uk Manual - Page 15

31. Attach the Seat Frame (36) to the Front Upright 31 (42) with the M10 x 80mm Carriage Bolt (11) and the Seat Knob (49). 49 36 11 42 32. Attach the Curl Pad (24) to the Curl Post (35) with 32 two M6 x 16mm Screws (18). 35 24 18 33. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on the following page. Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS on page 20 for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables; see TROUBLESHOOTING AND MAINTENANCE on page 19. 15