Weider 9150 Uk Manual - Page 14

27. Attach the Backrest (41) to the Front Upright (42) with two M6 x 73mm Bolts (43) and two M6 Washers (78). 27 43 78 42 43 78 41 28. Press a 38mm Square Inner Cap (32) into the 28 end of the Seat Frame (36). Attach the Bumper (67) to the Seat Frame (36) with the M5 x 20mm 13 Self-tapping Screw (80). Insert the M6 x 50mm Carriage Bolt (38) into the centre hole in the Seat Plate (37). Attach the wide end of the Seat (13) to the Seat Plate with two M6 x 16mm Screws (18). Attach the Seat (13) to the Seat Frame (36) with the M6 x 50mm Carriage Bolt (38), an M6 Washer (78), and the M6 Nylon Locknut (2). Attach the other end of the Seat (13) to the Seat Frame (36) with an M6 x 50mm Bolt (33) and an M6 Washer (78). 38 37 36 18 32 78 33 2 67 80 29. Press two 38mm Square Inner Caps (32) into the 29 ends of the Leg Lever (29). Lubricate an M10 x 60mm Bolt (7). Attach the Leg Lever (29) to the Seat Frame (36) with the Bolt and an M10 Nylon Locknut (21). Do not overtighten the Nylon Locknut; the Leg Lever must be able to pivot easily. 7 36 21 Lubricate 32 29 32 30. Slide a Pad Tube (28) into the hole in the Leg Lever (29). Press two 19mm Round Inner Caps (34) into the ends of the Pad Tube. Slide two Foam Pads (30) onto the Pad Tube. Repeat this step with the other Pad Tube (28) and the Seat Frame (36). 30 30 36 34 30 34 30 28 29 34 30 34 28 14