Weider Cjxt3 Master Trainer User Manual - Page 13

31. Press two 1 1/2" Bushings (93) into the Left Pedal (90), and two Bushings into the Right Pedal (89). Attach a Pedal Cover (92) to each Pedal with a 1/2" Tap Screw (6). Lubricate the pedal axles on the Rear Upright (82). Slide the Left Pedal (90) onto the left pedal axle, and the Right Pedal (89) onto the right pedal axle. Note: Make sure that the Pedals are on the correct sides; the slotted brackets must be on the insides of the Pedals. Hold a 1" Retainer (54) and 1" Round Cover Cap (55) against the end of the left pedal axle. The teeth on the Retainer must bend outward. Tap the Retainer and Round Cover Cap onto the pedal axle. Attach the Right Pedal in the same manner. 32. Lubricate the cylinder axles on the Rear Upright (82). Slide a 5/8" Spacer (97) and a Resistance Cylinder (91) onto each cylinder axle. Be sure that the Spacer is oriented as shown. Hold a 5/8" Retainer (95) and 5/8" Round Cover Cap (96) against the end of the right cylinder axle. The teeth on the Retainer must bend outward. Tap the Retainer and Round Cover Cap onto the cylinder axle. Tap a 5/8" Retainer (95) and 5/8" Round Cover Cap (96) onto the left cylinder axle in the same manner. 33. Raise the Left Pedal (90) and rest it on the hook at the ;owei eiIL; ui tue iefi Resistance Cylinder (91). The hook must be in one of the slots under the Left Pedal. Raise the Right Pedal (89) and rest it on the hook at the lower end of the right Resistance Cylinder (91). Make sure that the hooks are in the same position under both Pedals. 31 82 Lubricate 92 89 6 92 o Slotted Brackets - 90 4 93 49Y/ D--55 32 96____+zt. 97 82-Lubricate 95/151 .- 91 33 Q:11 I I ,,, 89 90 34. Press a 1" Round Inner Cap (49) into each end of the Lat Bar (85). 34 49 85 49 . . 13