Weider Club C650 Bench English Manual - Page 12
Attach the Weight Guide Top Frame 49 to
View all Weider Club C650 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12. Insert an M10 x 19mm Bolt (102) into the bracket 12 on the Weight Carriage (62) from the side shown. Slide the Weight Carriage (62) onto the Weight Carriage Upright (42) so that the weight tube is toward the Center Upright (45). 62 Weight Tube 45 102 42 13. Attach the Weight Guide Top Frame (49) to the 13 Weight Carriage Upright (42) with two M10 x 75mm Bolts (92), four M10 Washers (35), and two M10 Nylon Locknuts (34). Do not tighten the Nylon Locknuts yet. Attach the Weight Guide Top Frame (49) to the Center Top Frame (46) with two M10 x 78mm Bolts (32) and two M10 Nylon Locknuts (34). See steps 1 to 13. Tighten the M10 Nylon Locknuts (34) used in these steps. 14. Attach the Butterfly Bracket (55) to the Center 14 Upright (45) with two M10 x 78mm Bolts (32), two M10 Washers (35), and two M10 Nylon Locknuts (34). 32 49 46 34 35 34 35 34 35 92 35 42 32 55 32 45 35 34 35 12