Weider Club C650 Bench English Manual - Page 8

2. Identify the Rear Uprights (43), which are shorter 2 than the Front Uprights (not shown). Attach a Rear Upright to the Left Base (40) with two M10 x 78mm Bolts (32) and two M10 Nylon Locknuts (34). Make sure that the holes are on the side 43 shown. Do not tighten the Nylon Locknuts yet. Repeat this step with the other Rear Upright (43) and the Right Base (38). 43 Holes 34 38 32 40 3. Orient the Left Front Upright (44) so that the adjustment holes are facing the left Rear Upright (43) and the numbers are on the inward-facing side. Attach the Left Front Upright to the Left Base (40) with four M10 x 78mm Bolts (32), two Rack Joint Plates (85), and two M10 Nylon Locknuts (34). Do not tighten the Nylon Locknuts yet. Attach the Right Front Upright (not shown) to the Right Base (38) in the same way. 3 38 Numbers 32 32 85 43 44 Adjustment Holes 85 40 34 34 8