Weider Club C650 Bench English Manual - Page 13

15. Press two Plastic Butterfly Bushings (79) and two 15 Metal Butterfly Bushings (93) into the Right Grease Butterfly Arm (56). Wet the bottom of the Right 93 80 Butterfly Arm with soapy water and slide a 79 97 Butterfly Foam Pad (66) onto the Right Butterfly 55 Arm. 79 Apply some of the included grease to a 1/2" x 78mm Bolt (97) and to the Plastic Butterfly 93 94 57 Bushings (79). Attach the Right Butterfly Arm (56) to the Butterfly Bracket (55) with the Bolt and a 56 Grease 80 1/2" Nylon Locknut (94). Cover the Bolt and the Nylon Locknut with two Butterfly Caps (80). Do not overtighten the Nylon Locknut; the Right Butterfly Arm must pivot easily. Repeat this step with the Left Butterfly Arm 66 (57). 16. Attach the Butterfly Backrest (101) to the Center 16 Upright (45) with two M6 x 75mm Screws (96) and two M6 Washers (78). 101 96 78 45 96 78 17. IMPORTANT: See the CABLE DIAGRAM on 17 page 25 to identify the cables as you assem- ble them. Identify the Medium Cable (69). Route the Cable up through the Weight Guide Top Frame (49) and over a Pulley (87). Attach the Pulley inside the Top Frame with an M10 x 75mm Bolt (92), two M10 Washers (35), two 17mm Spacers (89), and an M10 Nylon Locknut (34). 49 34 87 35 89 35 89 92 69 13