Weider Club C650 Bench English Manual - Page 15
Shoulder Bolt, an M10 Small Washer 95, and an
View all Weider Club C650 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
22. Identify the Butterfly Cable (31). Grease an M8 22 x 43mm Shoulder Bolt (107) with grease. Attach the Cable to the Left Butterfly Arm (57) with the Shoulder Bolt, an M10 Small Washer (95), and an M8 Nylon Locknut (17). 23. Wrap the Butterfly Cable (31) over a "V"-pulley 23 (86). Attach the "V"-pulley, a Large Cable Trap (103), and two Full Pulley Guards (110) to the bracket on the Center Upright (45) with an M10 x 63mm Bolt (105) and an M10 Nylon Locknut (34). Make sure that the Large Cable Trap is orient- ed to hold the Cable in the groove of the "V"- pulley. Grease 107 31 95 17 57 45 34 31 86 110 103 110 105 24. Wrap the Butterfly Cable (31) under a Pulley (87). 24 Attach the Pulley and two Half Pulley Guards (109) to the Double "U"-bracket (81) with an M10 x 48mm Bolt (33) and an M10 Nylon Locknut (34). 31 87 33 34 109 109 81 25. Wrap the Butterfly Cable (31) over a "V"-pulley (86). Attach the "V"-pulley, a Large Cable Trap (103), and two Full Pulley Guards (110) to the other side of the bracket on the Center Upright (45) with an M10 x 63mm Bolt (105) and an M10 Nylon Locknut (34). Make sure that the Large Cable Trap is oriented to hold the Cable in the groove of the "V"-pulley. 25 105 110 103 31 86 110 45 34 15