Weider Club C650 Bench English Manual - Page 14

Attach the Pulley, a Small Cable Trap 88,

Get Weider Club C650 Bench PDF manuals and user guides View all Weider Club C650 Bench manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

18. Route the Medium Cable (69) over a Pulley (87) and down through the Weight Guide Top Frame 18 (49). Make sure that the Cable is routed between the Pulley and the welded rod as shown. Attach the Pulley inside the Weight Guide Top Frame with an M10 x 75mm Bolt (92), two M10 Washers (35), two 17mm Spacers (89), and an M10 Nylon Locknut (34). 34 35 87 89 Welded Rod 49 89 69 35 92 19. Wrap the Medium Cable (69) under a Pulley (87). 19 Attach the Pulley, a Small Cable Trap (88), and two Half Pulley Guards (109) to the indicated holes in the Pulley Plates (82) with an M10 x 48mm Bolt (33) and an M10 Nylon Locknut (34). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 109 69 34 Hole 87 Hole 109 88 82 33 20. Route the Medium Cable (69) up through the 20 Weight Guide Top Frame (49), over a Pulley (87), and back down through the Weight Guide Top Frame. Make sure that the Cable is routed between the Pulley and the welded rod as shown. Attach the Pulley inside the Weight Guide Top Frame with an M10 x 75mm Bolt (92), two M10 Washers (35), two 17mm Spacers (89), and an M10 Nylon Locknut (34). Welded 34 Rod 35 89 87 69 49 89 92 35 21. Attach the Medium Cable (69) to the M10 x 21 19mm Bolt (102) in the Weight Carriage (62) with an M10 Nylon Locknut (34). 14 69 34 102 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
14
19. Wrap the Medium Cable (69) under a Pulley (87).
Attach the Pulley, a Small Cable Trap (88), and
two Half Pulley Guards (109) to the indicated
holes in the Pulley Plates (82) with an M10 x
48mm Bolt (33) and an M10 Nylon Locknut (34).
Make sure that the Cable Trap is oriented to
hold the Cable in the groove of the Pulley.
21. Attach the Medium Cable (69) to the M10 x
19mm Bolt (102) in the Weight Carriage (62) with
an M10 Nylon Locknut (34).
20. Route the Medium Cable (69) up through the
Weight Guide Top Frame (49), over a Pulley (87),
and back down through the Weight Guide Top
Frame.
Make sure that the Cable is routed
between the Pulley and the welded rod as
shown.
Attach the Pulley inside the Weight Guide
Top Frame with an M10 x 75mm Bolt (92), two
M10 Washers (35), two 17mm Spacers (89), and
an M10 Nylon Locknut (34).
18. Route the Medium Cable (69) over a Pulley (87)
and down through the Weight Guide Top Frame
(49).
Make sure that the Cable is routed
between the Pulley and the welded rod as
shown.
Attach the Pulley inside the Weight Guide
Top Frame with an M10 x 75mm Bolt (92), two
M10 Washers (35), two 17mm Spacers (89), and
an M10 Nylon Locknut (34).
69
89
89
49
35
35
92
18
34
87
Welded
Rod
82
19
20
21
34
88
69
89
89
49
35
35
34
62
69
102
92
34
87
Hole
69
109
109
87
33
Hole
Welded
Rod