Weider Club C650 Bench English Manual - Page 16
M10 x 48mm Bolt 33 and an M10 Nylon Locknut
View all Weider Club C650 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
26. Grease an M8 x 43mm Shoulder Bolt (107). 26 Attach the Butterfly Cable (31) to the Right Butterfly Arm (56) with the Shoulder Bolt, an M10 Small Washer (95), and an M8 Nylon Locknut (17). 107 Grease 31 95 56 17 27. Identify the Long Cable (68). Route the eyelet 27 end of the Cable through the Foot Plate (67) and the Center Upright (45) and under a Pulley (87). Attach the Pulley (87) inside the Center Upright (45) with an M10 x 75mm Bolt (92), two M10 Washers (35), two 17mm Spacers (89), and an M10 Nylon Locknut (34). 28. Wrap the Long Cable (68) over a Pulley (87). 28 Attach the Pulley and two Half Pulley Guards (109) to the Double "U"-bracket (81) with an M10 x 48mm Bolt (33) and an M10 Nylon Locknut (34). 45 34 35 89 87 67 68 89 35 92 34 109 81 87 109 33 29. Wrap the Long Cable (68) under a Pulley (87). 29 Attach the Pulley and two Half Pulley Guards (109) to the Weight Carriage Base (41) with an M10 x 48mm Bolt (33) and an M10 Nylon Locknut (34). 68 34 109 87 41 33 109 16