Weider Flex 8960 Uk Manual - Page 11

19. Wrap the Long Cable (80) over a Large Pulley 19 (28). Attach the Pulley to the Top Frame (9) with an M10 x 70mm Bolt (64). Do not thread a 9 Locknut onto the Bolt yet. 64 28 80 20. Thread an M12 Locknut (97) halfway onto the 20 Weight Tube "U"-bracket (38). Tighten the Weight Tube "U"-bracket into the Weight Tube (44). Tighten the M12 Locknut against the Weight Tube. Wrap the Long Cable (80) under the Small Pulley (67) in the direction shown. Attach the Pulley to the Weight Tube "U"-bracket (38) with an M10 x 45mm Bolt (2) and an M10 Nylon Locknut (76). 80 76 97 44 67 38 2 21. Wrap the Long Cable (80) over a Large Pulley 21 (28). Attach the Pulley to the Top Frame (9) with the M10 x 70mm Bolt (64) used in step 19, and an M10 Nylon Locknut (76). 9 76 64 28 80 22. Wrap the Long Cable (80) under a Large Pulley 22 (28). Attach the Pulley and a pair of Pulley Covers (29) to the Upright (3) with an M10 x 140mm Bolt (72), an M10 Washer (75), and an M10 Nylon Locknut (76). Make sure that the small tabs on the Pulley Covers are in the indicated position. 11 80 Small 76 Tab 28 75 29 3 72