Weider Pro 4100 English Manual - Page 12
Wrap the High Cable 45 around a 3 1/2 Pulley
View all Weider Pro 4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
21. Wrap the High Cable (45) around a 3 1/2" Pulley 21 (38). Attach the Pulley at the forward hole, inside of the bracket on the Center Top Frame (14) with a 3/8" x 1 3/4" Bolt (66) and a 3/8" Nylon Locknut (70). 22. Attach the end of the High Cable (45) to the Small "U"-Bracket (79) with a 1/4" Washer (35) and a 1/4" Nylon Locknut (65). Note: Do not completely tighten the Nylon Locknut; it should be threaded only two turns onto the end of the Cable, as shown in the inset drawing. Attach the Small "U"-Bracket (79) to the Weight Tube (82) with a 5/16" x 1 3/4" Bolt (69) and a 5/16" Nylon Locknut (71). Do not overtighten the Locknut; the Weight Tube should be able to pivot in the "U"-Bracket. 22 79 69 70 14 45 38 66 45 71 35 65 82 45 65 23. Locate the Leg Press Cable (95). Attach the Cable inside the Left Leg (36) with a 3/8" x 2 3/4" Bolt (81), two 3/8" Washers (75), two Long Spacers (80), and a 3/8" Nylon Locknut (70). 24. Wrap the Leg Press Cable (95) around a 3 1/2" Pulley (38). Attach the Pulley inside the Leg Press Frame (30) with a 3/8" x 2 3/4" Bolt (81), two 3/8" Washers (75), two 1/2" Spacers (34), and a 3/8" Nylon Locknut (70). 23 81 80 75 70 80 95 75 36 24 34 75 81 38 75 70 34 95 30 12