Weider Pro 4100 English Manual - Page 6

3. Attach the Base Plate (37) to the Left Base (2) 3 with a 3/8" x 5 1/2" Bolt (58) and a 3/8" Nylon Locknut (70). Attach the Left Upright (7) to the Left Base (2) with the two indicated 5/16" x 2 1/2" Carriage Bolts (57) and two 5/16" Nylon Locknuts (71). Attach the Left Leg (36) to the Left Base (2) with the two indicated 5/16" x 2 1/2" Carriage Bolts (57) and two 5/16" Nylon Locknuts (71). Be sure the large upper hole in the Left Leg is on the side shown. Do not tighten the 5/16" Nylon Locknuts (71) yet. 7 71 2 57 71 71 36 Large Hole 71 57 58 70 37 4. Press a 2" x 2 1/2" Inner Cap (22) into the top of 4 the Right Leg (73). Attach the Right Upright (6) to the Right Base (1) with the two indicated 5/16" x 2 1/2" Carriage Bolts (57) and two 5/16" Nylon Locknuts (71). Attach the Right Leg (73) to the Right Base (1) with the two indicated 5/16" x 2 1/2" Carriage Bolts (57) and two 5/16" Nylon Locknuts (71). Do not tighten the 5/16" Nylon Locknuts (71) 6 yet. 22 73 71 71 71 71 57 1 57 6