Weider Pro 4100 English Manual - Page 15
Pulley 38. Attach the Pulley and a Cable Trap
View all Weider Pro 4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
33. Locate the Leg Lever Cable (96). Route the eyelet end of the Cable through the Right Leg (73) and attach it to the Leg Lever (4) with a 5/16" x 1" Shoulder Bolt (78) and a 5/16" Nylon Locknut (71). 33 4 71 73 34. Attach a 3 1/2" Pulley (38) inside the Right Leg (73) with a 3/8" x 2 3/4" Bolt (81), two 3/8" Washers (75), two 1/2" Spacers (34), and a 3/8" Nylon Locknut (70). 96 78 34 70 75 34 73 38 75 34 81 35. Route the Leg Lever Cable (96) through the Right 35 Upright (6) and around a 3 1/2" Pulley (38). Attach the Pulley inside the Upright with a 3/8" x 2 3/4" Bolt (81), two 3/8" Washers (75), two 1/2" Spacers (34), and a 3/8" Nylon Locknut (70). 36. Wrap the Leg Lever Cable (96) around a 3 1/2" 36 Pulley (38). Attach the Pulley and a Cable Trap (91) to the bottom set of holes in the indicated Double "U"-Bracket (56) with a 3/8" x 2" Bolt (62) and a 3/8" Nylon Locknut (70). Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley. 70 75 34 6 96 38 34 75 81 56 70 91 62 38 96 15