Weider Pro 9510 English Manual - Page 13
Seat Assembly, Cable Assembly
View all Weider Pro 9510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
CABLE ASSEMBLY 26. Attach the end of the Medium Cable (58) to 26 the Long "U"-Bracket (57) with a 1/4" Nylon Locknut (2) and a 1/4" Flat Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable so only a couple of threads are showing above the Nylon Locknut, as shown in the inset drawing. 57 27. Attach the Long Cable (23) to the Small "U"Bracket (67) with a 1/4" Nylon Locknut (2) 27 and a 1/4" Flat Washer (10). Do not com- pletely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing. Attach the Small "U"-Bracket (67) to the Weight Tube (63) with the 5/16" x 1 3/4" Bolt (72) and a 5/16" Nylon Locknut (3). 2 10 2 10 58 23 3 57 58 67 72 63 10 2 23 10 2 28. Attach the Backrest (41) to the Front Upright (42) with two 1/4" x 2 1/2" Screws (43) and 28 two 1/4" Flat Washers (10). The Backrest must be turned so the thickest end is at the bottom. 67 42 41 43 10 SEAT ASSEMBLY Thickest End 13